3D concrete printer
The RAF recently publicised their use of metal and 3D printers to manufacture spare parts for their Tornado jets, and in 2013 we were told a rifle was manufactured in the USA that used plastic and 3D printing.
So it should come as no surprise to hear concrete could also be used as a layering medium with 3D printers. The University of California have been ‘contour crafting’ in concrete to produce small-scale models of the external and internal walls of houses. The researchers under Professor Behrokh Khoshnevis are now testing a giant transportable 3D printer that could be used to build the walls of an entire house in just twenty four hours. Consistency, accuracy and speed could lead to the replacement of a large element of labour-intensive work.
The robotic system requires a flat ground slab with underground services in place. Rails are installed either side of the footprint to take a gantry crane that spans the building. A nozzle, driven by a computer-controlled crafter then delivers the layering of concrete. The layers build up to form an inner and outer skin to each wall, leaving them to be filled later with insulation or concrete.
In November 2014, Skanska and Loughborough University signed a deal to develop what they describe as the world’s first commercial concrete printing robot. Ref Construction Enquirer, Skanska to print 3D concrete products.
Building information model (BIM) enthusiasts will be watching such developments with great interest as it is a small step to link BIM design to 3D printing. It could offer an answer to accelerating the provision of UK housing without having to mass produce units to the exact same design.
[edit] Related articles on Designing Buildings
- 3D concrete printing market.
- 3D printed bridge.
- 3D printing in construction.
- Beyond bending - The Armadillo Vault.
- Flying factory.
- Mesh mould metal.
- Prefabrication.
- Offsite manufacturing.
- TruVision.
- WikiHouse.
[edit] External references
- Contour Crafting.
- MSN, The 3D printer that can build a house in 24 hours, 20 November 2013
- Discover Magazine, The Whole House Machine, 28 April 2005.
- Construction Enquirer, Skanska to print 3D concrete products. 24 November 2014.
You might also be interested in...
Featured articles and news
BSRIA Sentinel Clerk of Works Training Case Study
Strengthening expertise to enhance service delivery with integrated cutting-edge industry knowledge.
Impact report from the Supply Chain Sustainability School
Free sustainability skills, training and support delivered to thousands of UK companies to help cut carbon.
The Building Safety Forum at the Installershow 2025
With speakers confirmed for 24 June as part of Building Safety Week.
The UK’s largest air pollution campaign.
Future Homes Standard, now includes solar, but what else?
Will the new standard, due to in the Autumn, go far enough in terms of performance ?
BSRIA Briefing: Cleaner Air, Better tomorrow
A look back at issues relating to inside and outside air quality, discussed during the BSRIA briefing in 2023.
Restoring Abbotsford's hothouse
Bringing the writer Walter Scott's garden to life.
Reflections on the spending review with CIAT.
Retired firefighter cycles world to raise Grenfell funds
Leaving on 14 June 2025 Stephen will raise money for youth and schools through the Grenfell Foundation.
Key points for construction at a glance with industry reactions.
Functionality, visibility and sustainability
The simpler approach to specification.
Architects, architecture, buildings, and inspiration in film
The close ties between makers and the movies, with our long list of suggested viewing.
SELECT three-point plan for action issued to MSPs
Call for Scottish regulation, green skills and recognition of electrotechnical industry as part of a manifesto for Scottish Parliamentary elections.
UCEM becomes the University of the Built Environment
Major milestone in its 106-year history, follows recent merger with London School of Architecture (LSE).
Professional practical experience for Architects in training
The long process to transform the nature of education and professional practical experience in the Architecture profession following recent reports.
A people-first approach to retrofit
Moving away from the destructive paradigm of fabric-first.
New guide for clients launched at Houses of Parliament
'There has never been a more important time for clients to step up and ...ask the right questions'
The impact of recycled slate tiles
Innovation across the decades.
EPC changes for existing buildings
Changes and their context as the new RdSAP methodology comes into use from 15 June.
Comments
test